Bike Suspension: How Does It Work?

PedalezeStandard19 Comments

The Basics
     Spring & Damper
Compression Damping
     Low Speed vs High Speed
Bottom Out Control
Rebound Damping

The Basics

While bike suspension components can be the most rewarding, exciting and expensive components to buy, setup and configuration is the difference between a satisfying, bump gobbling trail monster and an overpriced pogo stick. While the rabbit hole runs deep with all sorts of knobs and doo-dads to turn and flip, we’ll cover the basics so you can get the most out of your newly acquired gear. In this guide, we’ll talk about the components and the basic adjustments available to you.

Bike Forks

Forks are also known as front suspension or front shocks. There are many options and brands available and generally speaking, are fairly easy to change out assuming you have a compatible travel length and wheel size.

Bike Shocks

These are integrated into suspension frames and are also known as rear shocks. Size, stroke length and damper tunes are built specifically for different frames. These are much less interchangeable and in some cases are proprietary to the frame and cannot be changed.

Spring & Damper

All bike suspension, whether fork or rear shock has 2 main functions which are performed by the spring and the damper. The spring primarily provides resistance while the damper provides the control of that resistance. There are two types of springs: air and coil.

Air Springs

Air springs are more and more common on bikes, from entry level to top end. The advantage of air springs is their lightweight and tune-ability. With a shock pump, you can set the air spring resistance to exactly what you’re looking for on the fly. Air spring volume, which further changes the kinematics of the shock, can be adjusted on some models. The downside is that in some cases, they don’t (generally speaking) provide quite the sensitivity and performance of coil springs. Recent technology is closing this gap quickly.

Coil Springs

Exactly what it sounds like! A metal corkscrew coil is what provides the resistance. The same mechanism that’s in your clicky-pen is also what helps you safely case that gap jump you come up short on. These are usually made from steel, but fancier shocks can have titanium springs as well. The main penalty is weight as coil shocks can be a full pound heavier than their air counterparts and have less adjustment range, but they can provide a trail feeling that’s so sensitive, you may wonder if you have a flat tire.

Compression Damping

This is where bike suspension talk can get confusing, so hang with us here. You’ll hear a lot of people talk about using compression damping to “firm up” their suspension and while that’s a great way to describe how your suspension may feel, it’s technically not correct.

The total resistance force is still being provided by the spring, but compression damping controls the rate at which your suspension will compress. Think of it this way: if you put a triceratops on the saddle of your bike, the amount of compression will be the same, no matter what settings are being used, but the time it takes to get there will change. On the trail, this means that compression damping settings control how much travel you will use in any given situation and can make the suspension feel softer or firmer without adjusting the spring rate.

Low Speed vs High Speed

Compression damping can be divided into 2 types: low speed and high speed.
Most bike suspension products with compression damping adjustment let you adjust low speed, but use preset values for high-speed compressions. Some value-oriented systems will be entirely pre-set at the factory.

If high-speed adjustment is not specifically called out, your shock is adjusting for low-speed compression only.

Low Speed Compression Damping

By “low speed” we mean the speed at which the suspension shaft is compressing. Generally speaking low speed compression damping is how bike suspension reacts to pedaling, the rider’s body weight input, cornering, braking and anything else that causes the suspension to compress at a relatively slow rate.

High Speed Compression Damping

As you’d expect, this is how bike suspension compresses in response to high shaft speeds. Examples of where the shaft speed will be high are hard landings, square edged bumps, and any trail input that comes when you’re traveling at high speed. Sometimes this is position sensitive, meaning that it only comes into effect in the end-stroke of your suspension. This also tends to be a higher-end feature that’s pre-set or absent on lower end models.

Bottom Out Control

This feature can either be a part of the spring componentry or a part of compression damping.

Air springs naturally have progressive spring rate, meaning that the amount of resistance growth isn’t linear. The resistance ramps up as it drives further into the stroke providing a natural bottom out resistance (Imagine the increasing resistance as you pump up a tire). This can be accentuated by reducing the volume of the air chamber, which can be adjusted on some higher-end suspension.

High speed compression is sometimes used as a bottom-out control and some suspension products even have specific compression damping features that control the end stroke for bottom out control as well.

A well-tuned bike fork or shock will bottom out here and there on a ride, but it should never have that “dropped a t-bone steak on the counter” harsh feeling. It may even go completely unnoticed and bottom out control can be a big part of that.

Lastly, in rear suspension, some bottom out control may be built into the bike. Some bike suspension designs adjust their leverage ratio throughout the travel to make for cushy bottom out. Don’t worry about this too much as its integrated into the frame design and isn’t adjustable.

Rebound Damping

Nearly all bike suspension products will have rebound damping. This type of damping controls the rate and speed at which the suspension returns to its full length after having been compressed. Most front and rear bike suspension will have a single adjustment for rebound, however, some will have both high and low speed rebound circuits. Just like compression damping, this refers to how quickly the suspension returns to its full length.

Position sensitive damping is also a feature in higher end models which allows the suspension to return more slowly after a bottom-out or near-bottom out so you don’t get bounced over the handlebars after hard landings.

19 Comments on “Bike Suspension: How Does It Work?”

  1. I don’t even know how I ended up here, but I thought
    this post was great. I do not know who you are but definitely you’re going to a famous blogger if you are not already 😉 Cheers!

  2. Ӏ was wondering if уou ever onsidered changing the layout of yоur site?
    Its very ᴡell ᴡritten; І love whɑt youve ցot tо saу.

    But maybe үou ϲould a lіttle more in tһe way of content so people couⅼd connect ѡith іt bettеr.
    Youve got an awful lot ᧐f text for onlу haѵing 1 oor two images.
    Мaybe you ϲould space iit ⲟut bettеr?

    my homepаge ali imsirovic hendon mob anthony

  3. Greetings, I think your blog may be having internet browser compatibility issues.
    When I look at your website in Safari, it looks
    fine however, when opening in IE, it’s got some
    overlapping issues. I just wanted to give you a quick heads up!
    Apart from that, excellent blog!

    Have a look at my blog slot Online

  4. You can fashionable do your light out ticket booking recompense distinct destinations, both, hired
    help and universal, at prices that are affordable and
    cheap. To start with your booking change, you
    can divulge the site. Do not worry, as you will be
    quite guided everywhere in the install’s easy booking
    procedure. One time you start, your tickets desire be done and confirmed
    in no time. So, you won’t be experiencing to rely on someone else, or any
    valuable third-party spokesman to boost you laws your
    regular tickets. You will also close up saving shin-plasters while booking
    on the site.

  5. Heya! I understand this is kind of off-topic
    however I needed to ask. Does building a well-established website
    such as yours require a lot of work? I’m completely new to running a blog but I do write in my
    journal daily. I’d like to start a blog so I will be able to share my personal experience and feelings online.
    Please let me know if you have any recommendations or tips for new aspiring bloggers.

  6. Need professional tree removal services? Our tree invidious and lopping services are delivered through effectively trained
    arborists at affordable prices. We covenant the
    prominence of someone’s own tree care, which is why we’re dedicated to taking care of trees,
    the ecosystem and the people that current everywhere them.
    We are the outstanding and most recognisable somebody in Tree Lopping and Purge,
    and also specialise in stump grinding and moving, mulching and pruning.
    Discover the quarrel and get in move today:

  7. Its such as you learn my thoughts! You appear to grasp so much about this, like you wrote the book in it or
    something. I believe that you simply can do with some p.c.
    to force the message house a little bit, however other than that, that is excellent
    blog. An excellent read. I will definitely be back.

Leave a Reply to travel to cape york from australia Cancel reply

Your email address will not be published. Required fields are marked *